*PLEASE USE THE AMAZON PART FINDER FUNCTION (AT THE TOP OF THIS PAGE) TO MAKE SURE THIS ITEM FITS YOUR VEHICLE.
Simplified Fitment Application:
2011-2016 for Hyundai Azera
2010-2014 for Hyundai Sonata
2009-2015 for Hyundai Tucson
2014-2015 Kia Cadenza
2011-2015 Kia Optima
2008-2010 Kia Rondo
2009-2016 for Kia-Sportage

Note: Wheel Hub Bearings must be torqued to vehicle specifications to prevent failure.

1. Raise the vehicle and remove lug nuts and wheel rim.
2. Remove the brake caliper and rotor. Support the brake caliper with an “S” hook or a piece of wire.
3. Remove the axle nut, using an axle nut socket. Follow the manufacturer's instructions for nut replacement.
4. Disconnect the ABS sensor wire from its mating connector point and positioning clips. *Make a note of the proper orientation and positioning of the sensor wire and bearing.
5. Remove the steering knuckle attachment bolts. *You may need a puller to remove the hub assembly. DO NOT damage the knuckle or axle shaft.
6. Clean and inspect the steering knuckle. Remove any debris, nicks or burrs using a fine file, wire brush, emery cloth or honing stone.
7. Reverse the above steps and actions to install the wheel hub back.

*Professional Installer Recommended
*No Instruction Included