Related Items

---

• 64x64 RGB LED Matrix Panel Full Color for Raspberry Pi/Ardui 192x192 mm 3mm Pitch 4096 LEDs Adjustable Brightness KWD 15.500
• -7% Electronics Basic Starter Kit for Arduino, 830 tie-Points Breadboard with Power Supply, More Than 400pcs Components Electronics Fun Kit Compatible with Arduino UNO R3, Raspberry Pi, STM32 KWD 6.500 KWD 7
• Luck-Fox Pico Mini M RV1103 Linux Micro Development Board with Pre-Soldered Header, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, 64 MB DDR2 (without Flash) KWD 5.500
• BME680 Environmental Sensor for Raspberry Pi/Raspberry Pi Pico/Arduino/ESP32, Supports Temperature/Humidity/Barometric Pressure/VOC Gas Detection, I2C and SPI 3.3V/5V Level KWD 7
• 5 Megapixels Camera Module for Raspberry Pi 1080P HD OV5647 Sensor with 15cm and 200cm Pin Ribbon Cable for Raspberry Pi Model A/B/B+, Pi 2B and Raspberry Pi 3B 3B+, Pi 4B KWD 3.500
• MCC 172: IEPE Measurement DAQ HAT for Raspberry Pi (MCC 172 with Two coaxial Cables) KWD 144.500
• Industrial Isolated USB to 4-Ch RS485 Converter with CH344L Chip, Multi Protection Circuits, Wall-Mount & Rail-Mount Support, Compatible with Linux, Android, Windows 11/10 / 8.1/8 / 7, etc. KWD 10.500
• 3.3V SN65HVD230 CAN Board Kit Connecting MCUs to CAN Network ESD Protection Onboard CAN Transceiver Compatible with PCA82C250 Communication Development Module KWD 4
• Gump's grocery 5PCS TCRT5000 IR Infrared Line Track Follower Sensor Module KWD 4
• Protection Case for Flipper Zero Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero WiFi Dev Board - Yellow & Black KWD 8.500
• -50% for Jetson Nano Camera IMX219 8MP with IMX219 Sensor 8 Megapixels Fixed-Focus 77 Degree FOV 3296 * 2512 Resolution 15P-1.0 MIPI Interface 30 fps KWD 5 KWD 10
• 4.2inch E-Ink Display Module for Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH 400x300 Resolution Black White Two Color SPI Interface Support Partial Refresh KWD 14
• RP2350 MCU Board with 1.28inch Round LCD 240×240 Pixels 65K Colorful IPS Display Dual-core & Dual-Architecture Design KWD 10.500
• PCIe to M.2 Adapter (E) with Cooling Fan for Raspberry Pi 5 Compatible with M.2 NVMe SSD 2230 2242, Gen2 and Gen3 Modes Onboard Dual LED Indicators Fits Raspberry Pi 5 NVMe KWD 8.500
• Stack HAT Raspberry pi I/O Expansion Shield Onboard 5 Sets 2x20 Connector to Directly Connect Multiple Expansion Functional Boards KWD 8.500
• IMX335 5MP USB Camera (B) for Raspberry Pi 5/Jetson Orin Kit 2K Video Recording 175° Wide Angle Better Sensitivity in Low-Light Condition Wide Dynamic Range USB2.0 Port KWD 20
• POE Expansion Board for NVIDIA Jetson Orin Nano/NX Mini Body Saves Even More Space Network Connection and Power Supply Provided for Jetson Orin KWD 9.500
• ESP32-C6-WROOM-1-N8 ESP32-C6 Development Board ESP32 C6 Microcontroller RISC-V 32-bit Single-Core Processor, Integrates W F-i 6, B L E 5 and IEEE 802.15.4, Supports USB and UART Development KWD 5
• PCIe to M.2 Adapter with PoE Function HAT+ (B) for Raspberry Pi 5 – Supports NVMe Drives (2230/2242/2260/2280) | IEEE 802.3af/at Power Over Ethernet | Gen2/Gen3 Mode | Bootable SSD Support KWD 13.500
• BME688 Environmental Sensor for Raspberry Pi/Raspberry Pi Pico/Arduino/ESP32, Supports Temperature/Humidity/Barometric Pressure/VOC Gas Detection/AI Function, I2C and SPI with AI Function KWD 11.500
• SMAKN High Sensitivity For Ozone Gas MQ-131 Ozone Gas Detection Sensor Module—Efficient dual sensor module KWD 31.500
• WM8960 Audio HAT Module for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Hi-Fi Sound Card HAT Stereo CODEC Playing and Recording I2S Interfac Stereo 3D Surrounding KWD 11
• Uninterruptible Power Supply (UPS) Module for Raspberry Pi/Jetson Nano Supports Charging and Power Output at The Same Time 3S & 5V 5A Output KWD 13
• SBC3003_0 - PhidgetSBC4 - Dual Core Single Board Computer 8GB KWD 51.500
• PoE M.2 E Key HAT+ for Raspberry Pi 5, PCIe to M.2 E Key Adapter with PoE, Supports NGFF (M.2 E Key) Wireless NIC, USB Bluetooth, SMA Antenna, 16-Pin PCIe & 40-Pin GPIO, 5V/12V Output KWD 13.500
• for Raspberry Pi RS485 CAN HAT (B) Isolated 2-Ch RS485 1-Ch CAN SPI Communication On-Board SC16IS752 and SP3485 Chips with MCP2515 Controller CAN Transceiver Multiple Protections KWD 10.500
• 2.7inch E-Ink Display HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH and Jetson Nano 264x176 Pixel Black White Two-Color 3.3V/5V E-Paper Screen LCD SPI Interface Support Partial Refresh KWD 9.500
• 2-Channel Isolated CAN Bus Expansion HAT for Raspberry Pi 5/4B/3B/2B/Zero/Zero W/Zero WH/Jetson Nano 2-CH CAN HAT+ Stackable Design for Expanding Multiple CAN Channel KWD 12
• 6PCS MB102 3.3V 5V Solderless Breadboard Power Supply Module DC 6.5-12V to 3.3V 5V Compatible Arduino KWD 4.500
• 7.5 inch EInk Display, White Black Red 3 Color E Paper Screen with Bluetooth & ABS Case, Editable Digital Business Card Name Badges for Meeting, Office, School, Library KWD 61.500
• Breakout Board for Raspberry Pi Pico 1 2 W H WH, GPIO Status LED (Raspberry Pi Pico is NOT Included in The Product) KWD 3.500
• 2Pcs PCA9685 16 Channel 12-bit PWM Servo Motor Driver IIC Interface Board Fit for Arduino/Raspberry Pi KWD 4.500